Double100 Turnkey line Solution shall cover design, lay out, raw material, installation and commission of assembling plant of solar panel on the turn-key basis.

Glass moving robot arm will move the glass to the transmission line and the paper picking robot arm remove the paper at the same time.

Used for cutting, punching and notching of solar cell modules EVA, TPT etc.

Cell strings laying up machine,working with Stringer.Cell strings are in parallel with the long side of the modules after conveyed in the Automatic Layup Machine,and adjusted mechanically and by CCD.

From the first device to grab the battery string, judge for themselves whether to turning, after rotation is completed in a safe location, by the laser correlation photoelectric get battery string space coordinates, and then through the manipulator Angle

Automatically complete the interconnection soldering process of the PV module busbar including the arrangement of the junction box end and the non-junction box,the cutting&bending of busbar and the soldering of ribbon and busbar.

Automatically complete the interconnection soldering process for the middle busbar of the half cell PV module, including the cutting&bending of busbar and the soldering of ribbon and busbar.

When the number of adhesive tapes is pasted, the speed fast, replacing the manual labor greatly and improves the working efficiency, and the adhesive position is accurately.

The four sides of the double glass adopt a belt servo drive mechanism. After the double glass enters, it returns to the right, the lower suction cup mechanism is lifted, and the suction cup is vacuumed when it is in place. The four sides of the tape drive